We took a slammed short bed second gen Dodge that used to blow the tires off in overdrive and turned it into a four wheel drive street truck that rips no prep airstrips and accidentally does four wheel drive burnouts. What started as a 12 valve five speed Shorty evolved through an auto swap and a...
We took a slammed short bed second gen Dodge that used to blow the tires off in overdrive and turned it into a four wheel drive street truck that rips no prep airstrips and accidentally does four wheel drive burnouts. What started as a 12 valve five speed Shorty evolved through an auto swap and a clean common rail conversion that made 1,061 horsepower on its first dyno event, grew into compound turbos, broke parts, got better parts, and finally landed where it needed to be all along, four wheel drive and actually usable on sketchy surfaces.
This episode of the Power Driven Podcast tells the story of the Shorty, a truck that went from a chopped two wheel drive hot rod to a Duramax chassis swapped Cummins that can finally hook on the street. The guys share how the build came together, from cutting down frames and moving torsion bar mounts to dealing with CV axles pulling apart when the front end was lowered. These are the little challenges that only come from real shop time, and solving them made the truck ride right without losing its daily manners.
On track the results speak for themselves. With a Power Driven Diesel Aggressor 98 over a 467 compound setup, the Shorty went 7.12 in the eighth mile on its first solid pass, cutting a 1.66 sixty foot on a no prep surface. Later it even raced eliminations in the rain and ran a 7.33 against a fast F-150, something it could never have done back when it spun all the way down the track as a two wheel drive. Now it leaves straight, carries speed, and does it with a full interior and street friendly setup that you can still drive every day.
The crew also shares updates on pushing the limits of block strength. After breaking more than a few 12 valve and 5.9 Cummins blocks, testing has shifted to a 6.7 base under a 12 valve head. Welding coolant passages, experimenting with girdles, and chasing fuel only horsepower in the 1500 range shows how far development has come. The focus is always on real power that lasts, with parts anyone can buy and run on their own builds.
If you are into diesel performance, Cummins builds, dyno testing, drag racing, turbo upgrades, and truck builds that prove themselves on and off the track, this episode is for you. Subscribe to the Power Driven Podcast, follow for more episodes, and check out Power Driven Diesel for the tech, tuning, and parts that keep this community moving forward.