It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show!Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to bec...
It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show!
Sponsored by You
If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
What's on the Bench
- Marc is building with epoxy!
- Shannon is finishing with a ketchup packet.
- Matt is finishing up kitchen stuff and still sawing stuff too.
Kickback
- Joe reaches back out to us to say his hand plane issues were because of the "friggin' frog" in the wrong place.
- Andy wants to tell us about a new modeling software at Layout.computer that was designed for chair makers but has now added a casework component too.
- Brandon offers the advice of putting an air filter outboard of the intake on his dehumidifier and what a difference it has made.
- Andrew calls in to share his surgeon father's advice about being cut with a dull tool or sharp tool, spoiler alert, "flappy bits" is a technical term.
New Sponsor - Woodcraft
We reminisce about our early Woodcraft store experiences and the classes we have taken there. We are thrilled to be a part of that journey for other woodworkers and look forward to working with Woodcraft.
Listener Questions
- David wants to know why stains suck so much and we try to tell him they don't...and fail. Marc suggests making a blotch control to help with stain absorption.
- Steve looks for advice on making angled tenons for a chair using power tools. Angled mortise or angled tenon?
- Paul has several Ash logs that were killed by the Ash Borer and asks for advice on what to do with them.
- Steve is taking a trip to Japan and wants to know some woodworking related stuff to see. We don't know but want to know so are asking the audience for advice. Write/call in and tell us your suggestions.
Ask Us a Question
Send in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.